BHVCM - CLEAR GLOSS LACQUER,R66-5100,TT-L-32A
- MSDS: BHVCM
- Manufacturer: SEAGRAVE COATINGS CORP
- Product Name: CLEAR GLOSS LACQUER,R66-5100,TT-L-32A
- National Stock Number: 8010-00N010463
Product Identification
Product ID:CLEAR GLOSS LACQUER,R66-5100,TT-L-32A
MSDS Date:02/11/1987
FSC:8010
NIIN:00N010463
MSDS Number: BHVCM
Responsible Party
CARLSTADT, NJ 07072
Emergency Phone: 201-933-1000
Info Phone: 201-933-1000
Cage: DO631
Contractor
Telephone: 1-800-424-9300
Cage: 78767
Ingredients
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of
Overexposure:EYES:IRRITATION.SKIN:IRRITATION.INGEST/INHAL:POSSIBLE
HEADACHE,DIZZINESS,NAUSEA,WEAKNESS,IRRITATION,PALLOR.
First Aid
First Aid:EYES:FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES.TAKE TO PHYSICIAN.SKIN:WASH WITH SOAP AND
WATER.REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN IF
NEEDED.INGEST:DRINK 1-2 GLA SSES OF WATER TO DILUTE.DO NOT INDUCE
VOMITING.CONSULT PHYSICIAN.INHAL:REMOVE TO FRESH AIR.RESTORE
BREATHING.TREAT SYMPTOMATICALLY,CONSULT PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:21F,-6.11C
Lower Limits:12.0
Upper Limits:1.0
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .DO NOT USE WATER EXCEPT WITH FOG NOZZLES.
Unusual Fire/Explosion Hazard:DO NOT USE ON HOT SURFACES OR WHERE
ELECTRIC SPARKS/STATIC CHARGE MAY BE PRESENT OR GENERATED.EXTREME
HEAT MAY CAUSE PRESSURE EXPLOSION.COOL INTACT (SEE SUPP)
Accidental Release
Spill Release Procedures:REMOVE ANY SOURCE OF SPARK OR FLAME.PROVIDE
IMMEDIATE VENTILATION.AVOID BREATHING OF VAPORS AND WEAR
APPROPRIATE RESPIRATOR.ADD ABSORBENT TO SPILL,PLACE IN SEALED METAL
CONTAINERS,USING NON-SPARKING T OOLS.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE IN RED LABEL AREA IN ORIGINAL
CONTAINERS.
Other Precautions:GROUND ALL EQUIPMENT AND CONTAINERS WHEN POURING.
Exposure Controls
Respiratory Protection:APPROVED CHEMICAL FILTER DESIGNED TO REMOVE A
COMBINATION OF PARTICLES/VAPORS.IN CONFINED AREA,USE AIR SUPPLIED
LINE TYPE REPIRATORS OR HOODS.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:SOLVENT RESISTANT RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES RECOMMENDED.
Other Protective Equipment:APRON AND BOOTS RECOMMENDED.IF SKIN CONTACT
IS LIKELY USE PROTECTIVE SKIN CREAM.EYE BATH AND SAFETY SHOWER.
Work Hygienic Practices:N/K
Supplemental Safety and Health
EXPLO HAZ:CONTAINER WITH WATER.OXIDES OF CARBON ARE DECOMPOSITION
PRODUCTS.
Chemical Properties
Boiling Pt:B.P. Text:175-284F
Decomp Temp:Decomp Text:N/K
Vapor Density:>1 (AIR=1)
Spec Gravity:0.96 (WATER=1)
Evaporation Rate & Reference:N/K
Solubility in Water:NONE
Appearance and Odor:LIQUID/MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:EXCESSIVE HEAT/FIRE.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.